Linear Actuator 805H
Linear Actuator 805H linear actuator, 3,500-17,000N high force, CAN bus and analogue control, IP67.
- Force: 3,500-17,000N
- Stroke: ≤1,000 mm
- Speed: 6.5-35 mm/s
Linear Actuators
DJ806 linear actuator, 50-1,200N force, speeds up to 80 mm/s, IP66 protection.
The DJ806 series is a compact solution offering high speed (up to 80 mm/s) in the low to medium force class. It is equipped with an ACME lead screw, potentiometer or reed switch feedback options and electronic overload protection. A stainless steel rod and powder metallurgy gears provide reliable service life.
| Force | 50-1,200N |
|---|---|
| Speed | 5.5-80 mm/s (optional) |
| Voltage | 12, 24, 36, 48V DC |
| Stroke | ≤1,000 mm |
| Duty Cycle | 25% (≤4 min at 20℃ full load) |
| Lead Screw | ACME |
| Position Feedback | End-stop signal, potentiometer or reed switch (optional) |
| Operating Temperature | -10℃ to 65℃ (optional -40℃) |
| Protection Class | IP66 |
| Housing | Stainless steel rod, aluminium housing, Zn-Ni coated end, powder metallurgy gears |
Mechanical, electrical and thermal design are optimised together for reliable field performance.
Industries where this product is deployed with field-validated configurations.
This product family is deployed across the industries below with field-validated configurations.
All Products
Linear Actuator 805H linear actuator, 3,500-17,000N high force, CAN bus and analogue control, IP67.
Linear Actuator 812 linear actuator, 5,000-20,000N force, multi-motor (DC/AC/servo), ball screw.
From the Hedron portfolio: DJ820, 2500N force class.
Share your application’s load, stroke and environmental conditions. Our engineering team will prepare a configuration suited to your project.